Cradlepoint CBA250 Bedienungsanleitung PDF herunterladen

Cellular

Broadband Adapter

CBA250

Quick Start Guide

Connect Power:

To setup the CBA250, unbox

the packaging. Next, plug the

power adapter into the CBA250 first,

then plug the adapter into the wall

socket.

Connect Device:

Plug in an activated USB or

ExpressCard device into the

appropriate slot. Note that your

device must be on the supported list.

For more information:

http://www.cradlepoint.com/support

O - Configuration mode

I - Normal mode (Pass Through)

LED Status:

1. Power

On - Solid Green

2. Ethernet

Connected - Solid Green

Activity - Blinking Green

3. Not Used

4. USB Status

Standby/Connecting - Orange

Connected - Solid Green

Activity - Blinking Green

Red - Unsupported Device Error

4 5

5. ExpressCard

Standby/Connecting - Orange

Connected - Solid Green

Activity - Blinking Green

Red - Unsupported Device Error

6. Signal Strength

Signal strength is displayed in 4

bars but is measured in half

bars. A full bar will be solid, and

a half bar will blink.

Parts List:

Cellular Broadband Adapter

Power Adapter

Quick Start Guide

Notice: Taking these actions will erase all settings and changes

you have made to the router. All passwords and settings will

return to the factory defaults.

Manually Updating Firmware

1. Switch the unit to Configuration mode - O.

2. Connect to the adapter via Ethernet.

3. Use a browser to access the Admin page (http://192.168.0.1).

4. The Admin password is the last six digits of the unit’s MAC address.

5. Select the 'Tools' tab on the top, then the 'Firmware' menu on the left.

6. Select the button “Check Online Now for Latest Firmware Version”

7. Select the Upgrade Router button. (If new Firmware available.)

8. Do not turn off or unplug the device while it is upgrading.

9. The upgrading process should take a few minutes.

Factory Reset

1. Ensure the adapter is unplugged from the wall socket.

2. Press and hold the reset button.

3. Continuing to hold the reset button, plug the device into a power source.

4. Release the reset button when the lights flash (10 seconds).

5. The adapter will restart and be available on the default settings.

Connect LAN:

Connect a client device to the

CBA250 with an Ethernet cable.

For most users, the CBA250 can be used without congura-

tion. When needed, the Cong switch is used to place the

unit in the conguration mode. Conguration mode is used

to setup user parameters, download new Firmware and

enable cellular modem diagnostics.

Conguration mode is accessed by browsing to the Admin

page at http://192.168.0.1

1 2

Quick Start Guide 1
FCC Statement: 2

Inhaltsverzeichnis

Seite 1 - Quick Start Guide

Cellular Broadband AdapterCBA25022Quick Start Guide11Connect Power: To setup the CBA250, unbox the packaging. Next, plug the power adapter into

Seite 2 - FCC Statement:

FCC Statement: This equipment has been tested and founnd to comply with the limits for a Class B digital device, pursuant to Part 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Cradlepoint CBA250 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Cradlepoint CBA250 herunter. Cradlepoint CBA250 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Cradlepoint CBA250