Cradlepoint MBR95 Einstellungsanleitung Seite 6

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 11
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 5
10
SIGNAL STRENGTH BUTTON Blue LED bars indicate the active modem’s signal strength.
Press WPS button to turn on/off. 4 Solid Bars = strongest signal 1 Blinking Bar = weakest signal
POWER The MBR95 must be powered using an approved 12V DC power source.
Green = Powered On. No Light = Not receiving power. Check that the unit is connected to an outlet and the
power switch is on. Amber = Attention. Check router status page.
NETWORK LAN CONNECTION Indicates a connected device on the 1-4 LAN ports on the MBR95.
Blue = Connected to an active 10/100 Ethernet interface. Blinking Blue = trafc. No Light = not connected,
the connection is not congured correctly, router is not congured correctly, or may not be turned on.
EC
WAN CONNECTION Indicates information about a data source connected to the WAN port (blue Ethernet port).
Blue = Connected to an active 10/100 Ethernet interface. Blinking Blue = trafc. No Light = not connected, the
connection is not congured correctly, or switch or router are not congured correctly or turned on.
WPS WiFi Protected Setup. When you press the WPS button for 10 seconds, it allows you to use WPS
for your WiFi security. Blinking Blue = WPS setting is in progress. Solid Blue = WPS is active.
CradlePoint recommends using WPA2 WiFi Security.
11
WiFi BROADCAST Indicates activity on the WiFi broadcast for the 2.4GHz band.
Blue = 2.4 GHz WiFi is on and operating normally.
Blinking Red = Error with 2.4GHz connection.
No Light = WiFi is off.
USB MODEMS Indicates the status of the USB modems connected to the MBR95.
Blue = Modem has established an active 4G connection. Blinking Blue = Modem is connecting to 4G.
Green = Modem has established an active 3G connection. Blinking Green = Modem is connecting to 3G.
Amber = Modem is not active. Blinking Amber = Data connection error. No modem connection possible.
Blinking Red = Modem is in the process of resetting.
EC
EC
/ / / / / / / / / / / / / / (continued)
Seitenansicht 5
1 2 3 4 5 6 7 8 9 10 11

Kommentare zu diesen Handbüchern

Keine Kommentare