Added additional Modem diagnostics to SNMP. These include CINR, SINR, RSRP, RSRQ,
and a number of other values. The latest WIPIPE MIB version is 1.8 to reflect these
changes.
Added client site visit reporting to the log that reports which clients accessed an external IP
address. Network Settings -> Firewall Configuration -> Firewall Options -> Log Web
Access.
Active and passive DNS Failure Check added to Ethernet WAN sources to make their
Failure Check options match what is provided for modems.
(2100 only) Band-steering has been added. If a client is attached to the 2.4GHz radio on
the 2100 and it is capable of using the 5.0GHz radio, it will be steered to the generally more
open and higher-performing band. Band-steering is enabled whenever the SSID of the
2.4GHz and 5GHz radios are the same. Note that band steering may negatively impact
connectivity in some situations, especially at long range. If you see performance or
connectivity issues it is recommended that you disable band-steering by setting the 2.4GHz
SSID and 5 GHz SSID to different values.
RADIUS timeout and retry settings have been added for Hotspot support.
Added the ability to prioritize VOIP packets from the LAN to the WAN when using a VPN
tunnel. Any QoS DSCP codes will be copied from the inner packet to the VPN packet after
VPN encryption.
Additional UI/Usability changes:
NOTE: Local SSH has been enabled by default. This means that local clients can
SSH to the router using the admin username and password or other usernames if
Advanced Security Mode is enabled. WAN/Remote SSH has not been changed.
Modem diagnostics. Extended, categorized and sorted modem diagnostic information on the
page.
Modem Settings, On Demand Start Connection checkbox. When checked, the modem will
connect to begin On Demand mode after plug or reset. When unchecked, the modem will
not connect to begin On Demand mode after plug or reset, but will wait for LAN to WAN
traffic before initiating a connection.
SMS interface extension. Added Help command.
The wireless band has been added to the Wi-Fi clients list.
An Asset Tag field has been added to the router under the Local Administration tab.
Added ability for negation on source and destination addresses in WAN affinity.
Defects fixed:
IE9 and IE10 UI issues when setting up VPN tunnel
CP Secure Connect tunnel did not re-establish after reboot
GRE failover was not working correctly in some conditions
Clients dropped off of the Clients List and returned
OpenDNS might have issues reconnecting after reboot, depending on the speed of the
WAN reconnection
SSH to Serial port was scrambling data
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern